FEAT : Pilotage TV OK

config/tv.yaml

@@ -23,7 +23,6 @@ wifi:
   ssid: !secret wifi_ssid
   password: !secret wifi_password
 
-# Example configuration entry
 uart:
   tx_pin: GPIO44 # Il faut les inverser !!!!
   rx_pin: GPIO43

config/tv2.yaml

@@ -0,0 +1,95 @@
+esphome:
+  name: tv2
+  friendly_name: tv2
+  on_boot: 
+    then:
+      - output.turn_off: relais
+      - output.turn_on: bouton_vert
+      - output.turn_off: bouton_rouge
+
+esp32:
+  board: esp32-c6-devkitc-1
+  variant: esp32c6
+  framework:
+    type: esp-idf
+
+# Enable logging
+logger:
+
+uart:
+  tx_pin: GPIO17 # Il faut les inverser !!!!
+  rx_pin: GPIO16
+  baud_rate: 9600
+  # debug:
+  #   direction: BOTH
+  #   dummy_receiver: false
+  #   after:
+  #     delimiter: "\n"
+  #   sequence:
+  #     - lambda: UARTDebug::log_string(direction, bytes);
+  
+modbus:
+
+output:
+  - platform: gpio
+    pin: GPIO1
+    id: relais
+  - platform: gpio
+    pin: GPIO22
+    id: bouton_vert
+  - platform: gpio
+    pin: GPIO23
+    id: bouton_rouge
+
+globals:
+  - id: low_power_count
+    type: int
+    initial_value: '0'
+  - id: from_start_count
+    type: int
+    initial_value: '0'
+  - id: puissance_faible
+    type: bool
+    initial_value: 'false'
+
+sensor:
+  - platform: pzemac
+    address: 4
+    power:
+      name: "PZEM-004T V3 Power"
+      on_value: 
+        then:
+          - lambda: |-
+              if (id(from_start_count) < 10) {
+                id(from_start_count)++;
+                id(bouton_rouge).turn_on();
+                id(relais).turn_on();                
+                ESP_LOGD("main", "--> Démarrage... (%d / 10)", id(from_start_count));
+              } else {
+                if (id(puissance_faible)) {
+                  id(low_power_count)++;
+                  ESP_LOGD("main", "--> Puissance faible (%d / 5)", id(low_power_count));
+                }
+                if (id(low_power_count) >= 5) {
+                  ESP_LOGD("main", "--> TV OFF !");
+                  id(relais).turn_off();
+                }              
+              }
+      on_value_range:
+        - below: 40
+          then:
+            - lambda: |-
+                ESP_LOGD("main", "--> Puissance faible !");
+                id(puissance_faible) = true;
+                id(bouton_vert).turn_off();
+        - above: 40
+          then: 
+            - lambda: |-
+                ESP_LOGD("main", "--> Puissance normale.");
+                id(puissance_faible) = false;
+                id(bouton_vert).turn_on();
+                id(relais).turn_on();
+                id(low_power_count) = 0;
+                             
+    update_interval: 5s
+