REFACTO : Mise au propre

config/seeed-studio.yaml

@@ -1,9 +1,6 @@
 esphome:
   name: seeed-studio
   friendly_name: seeed studio
-  on_boot: 
-    then:
-      - output.turn_on: DE_RE
 
 esp32:
   board: esp32-s3-devkitc-1
@@ -12,6 +9,7 @@ esp32:
 
 # Enable logging
 logger:
+ level: DEBUG
 
 # Enable Home Assistant API
 api:
@@ -26,26 +24,18 @@ wifi:
   ssid: !secret wifi_ssid
   password: !secret wifi_password
 
-output:
-  - platform: gpio
-    pin: GPIO21 # Led de la carte
-    id: led_output
-  - platform: gpio
-    pin: GPIO3  # le pin connecté à DE/RE
-    id: DE_RE
-
 uart:
   id: mod_bus_id
   tx_pin: GPIO44 # Il faut les inverser !!!!
   rx_pin: GPIO43
   baud_rate: 4800
-  debug:
-    direction: BOTH
-    dummy_receiver: false
-    after:
-      delimiter: "\n"
-    sequence:
-      - lambda: UARTDebug::log_string(direction, bytes);
+  # debug:
+  #   direction: BOTH
+  #   dummy_receiver: false
+  #   after:
+  #     delimiter: "\n"
+  #   sequence:
+  #     - lambda: UARTDebug::log_string(direction, bytes);
 
 modbus:
   id: modbus1
@@ -70,36 +60,36 @@ sensor:
     id: sensor1
     modbus_controller_id: modbus_controller1
     name: "Wind speed"
-    device_class: wind_speed
-    register_type: holding
+    register_type: read
     address: 0
-    unit_of_measurement: "m/s"
     value_type: U_WORD
-    accuracy_decimals: 1
+    accuracy_decimals: 0
     filters:
-      - multiply: 0.1
       - max:
           window_size: 1
           send_every: 1
       - min: 
           window_size: 1
           send_every: 1
-      # - exponential_moving_average:
-      #     alpha: 0.1
-      #     send_every: 12
     on_value:
       then:
         - mqtt.publish:
             topic: "rbo2"
-            payload: !lambda 'return "Vent --> " + to_string(x);'
+            payload: !lambda 'return "Vent (x 10 en m/s) --> " + to_string(x);'
   - platform: modbus_controller
     modbus_controller_id: modbus_controller2
     name: "Wind direction gear"
-    internal: true
     register_type: read
     address: 0
     value_type: U_WORD
     accuracy_decimals: 0
+    filters:
+      - max:
+          window_size: 1
+          send_every: 1
+      - min: 
+          window_size: 1
+          send_every: 1
     on_value:
       then:
         - mqtt.publish:
@@ -109,7 +99,7 @@ sensor:
 mqtt:
   broker: "pc-raymond.home"
   id: mqtt1
-  log_topic: rbo
+  log_topic: null
   birth_message:
-    topic: rbo2
-    payload: 'Nouvelle connexion...'
+    topic: rbo
+    payload: 'Nouvelle connexion MQTT...'