esphome:
  name: seeed-studio
  friendly_name: seeed studio
  on_boot: 
    then:
      - output.turn_on: DE_RE

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "1tRYVfsGzt8mFr+ay9hE24pdPd8IACedduh9tLWg4xs="

ota:
  - platform: esphome
    password: "d68060a1d18b9d61354434595717070c"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Seeed-Studio Fallback Hotspot"
    password: "FrTglhXBIVqi"

captive_portal:

output:
  - platform: gpio
    pin: GPIO21 # Led de la carte
    id: led_output
  - platform: gpio
    pin: GPIO3  # le pin connecté à DE/RE
    id: DE_RE

switch:
  - platform: output
    name: "LED"
    output: led_output
    id: led_switch
    restore_mode: ALWAYS_OFF

interval:
  - interval: 5s
    then:
      - switch.toggle: led_switch
      - logger.log: "rbo2"

uart:
  id: mod_bus_id
  tx_pin: GPIO44 # Il faut les inverser !!!!
  rx_pin: GPIO43
  baud_rate: 4800
  debug:
    direction: BOTH
    dummy_receiver: false
    after:
      delimiter: "\n"
    sequence:
      - lambda: UARTDebug::log_string(direction, bytes);

modbus:
  id: modbus1
  uart_id: mod_bus_id

modbus_controller:
  - id: modbus_controller1
    address: 1
    modbus_id: modbus1
    setup_priority: -10
    command_throttle: 2s
    update_interval: 4s

sensor:
  - platform: modbus_controller
    id: sensor1
    modbus_controller_id: modbus_controller1
    name: "Wind speed"
    device_class: wind_speed
    register_type: holding
    address: 0
    unit_of_measurement: "m/s"
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1
      - max:
          window_size: 1
          send_every: 1
      - min: 
          window_size: 1
          send_every: 1
      # - exponential_moving_average:
      #     alpha: 0.1
      #     send_every: 12
    on_value:
      then:
        - mqtt.publish:
            topic: "rbo2"
            payload: !lambda 'return to_string(x);'
    
mqtt:
  broker: "pc-raymond.home"
  id: mqtt1
  log_topic: rbo
  birth_message:
    topic: rbo2
    payload: 'send_every: 1 !'