esphome:
  name: seeed-studio
  friendly_name: seeed studio

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:
 level: DEBUG

# Enable Home Assistant API
api:
  encryption:
    key: "1tRYVfsGzt8mFr+ay9hE24pdPd8IACedduh9tLWg4xs="

ota:
  - platform: esphome
    password: "d68060a1d18b9d61354434595717070c"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

uart:
  id: mod_bus_id
  tx_pin: GPIO44 # Il faut les inverser !!!!
  rx_pin: GPIO43
  baud_rate: 4800
  # debug:
  #   direction: BOTH
  #   dummy_receiver: false
  #   after:
  #     delimiter: "\n"
  #   sequence:
  #     - lambda: UARTDebug::log_string(direction, bytes);

modbus:
  id: modbus1
  uart_id: mod_bus_id

modbus_controller:
  - id: modbus_controller1
    address: 1
    modbus_id: modbus1
    setup_priority: -10
    command_throttle: 2s
    update_interval: 4s
  - id: modbus_controller2
    address: 2
    modbus_id: modbus1
    setup_priority: -10
    command_throttle: 2s
    update_interval: 4s

sensor:
  - platform: modbus_controller
    id: sensor1
    modbus_controller_id: modbus_controller1
    name: "Wind speed"
    register_type: read
    address: 0
    value_type: U_WORD
    accuracy_decimals: 0
    filters:
      - max:
          window_size: 1
          send_every: 1
      - min: 
          window_size: 1
          send_every: 1
    on_value:
      then:
        - mqtt.publish:
            topic: "rbo2"
            payload: !lambda 'return "Vent (x 10 en m/s) --> " + to_string(x);'
  - platform: modbus_controller
    modbus_controller_id: modbus_controller2
    name: "Wind direction gear"
    register_type: read
    address: 0
    value_type: U_WORD
    accuracy_decimals: 0
    filters:
      - max:
          window_size: 1
          send_every: 1
      - min: 
          window_size: 1
          send_every: 1
    on_value:
      then:
        - mqtt.publish:
            topic: "rbo2"
            payload: !lambda 'return "Sens --> " + to_string(x);'

mqtt:
  broker: "pc-raymond.home"
  id: mqtt1
  log_topic: null
  birth_message:
    topic: rbo
    payload: 'Nouvelle connexion MQTT...'