esphome:
  name: tv
  friendly_name: TV

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "wbYIRZHpZb8Q8urkl1PqMfP54rY8TUca3VBJxx5DcmI="

ota:
  - platform: esphome
    password: "dbba6251c020b7547d3703b1fc8b5d9d"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

# Example configuration entry
uart:
  tx_pin: GPIO44 # Il faut les inverser !!!!
  rx_pin: GPIO43
  baud_rate: 9600
  # debug:
  #   direction: BOTH
  #   dummy_receiver: false
  #   after:
  #     delimiter: "\n"
  #   sequence:
  #     - lambda: UARTDebug::log_string(direction, bytes);
  
modbus:

output:
  - platform: gpio
    pin: GPIO8
    id: gpio_8

sensor:
  - platform: pzemac
    address: 4
    power:
      name: "PZEM-004T V3 Power"
      on_value_range:
        - above: 2
          then:
            - lambda: |-
                // Convertir la valeur flottante en string
                char buffer[30]; // Taille suffisante pour stocker la chaîne
                snprintf(buffer, sizeof(buffer), "%.2f", x);
                ESP_LOGD("main", "--> Lampe ON (%s W)", buffer);
                id(gpio_8).turn_on();
        - below: 2
          then:
            - wait_until: 
                condition:
                  lambda: 'return millis() >= 60000;'
            - lambda: |-
                // Convertir la valeur flottante en string
                char buffer[30]; // Taille suffisante pour stocker la chaîne
                snprintf(buffer, sizeof(buffer), "%.2f", x);
                ESP_LOGD("main", "--> Lampe OFF (%s W)", buffer);
                id(gpio_8).turn_off();
    update_interval: 5s